Electricity is the main source in
the operation of electronic devices that we have. Electricity can flow when
there is conduction and also their potential difference. No electrical
conductivity of various kinds, ranging from air, water, salt, copper, iron, and
so forth. Electricity can not flow on an object that is isolation. Objects that
have insulating properties in general is the main ingredient objects made of
rubber ores, such as plastic, and rubber. Thus, in the manufacture of safety
conductor materials (materials that can conduct electricity), we often
encounter such material is covered by an insulating material. Examples of
frequently encountered is wired in series installation of our household, and
also wiring of our electronic tools.
From household wiring and
electronic cables we had, we could have electricity in our daily lives. We need
to know, in fact electricity is something that is not visible but we can feel
its presence. Here means the electricity has the same properties with ghosts,
ie not visible and we can feel its presence. Electricity actually has two
sides, the good side and a bad side. I think this is reasonable, because all
the things that exist in this earth definitely has two sides, both the good
side or the bad side. A simple example, we know that water is the source of
life for all living things (which has a soul). Here means that we know better
than the side of the water. However, the excessive amount of water that can
kill a living creature. A simple example is if we drink too much water when we
swam middle of the lake or the middle of the ocean, we will experience a loss
of consciousness (fainting) until death.
From these two we know exactly
what risks we face if we are dealing with electricity. Both high voltage and
small voltage electricity all at risk, just how do we minimize the risk. Gains
or both sides of electricity is that we can operate a matter that requires a
power source. While the loss or the bad side, we can not operate a matter that
requires a power source. If we are adjacent to or in contact with a conductive
electrified then we'd been stung by it. Possibly the worst of the shock it is
death for us.
So how to keep us safe in the
face of such a situation, a situation where we are adjacent to or in contact
with live electrical conductors. In frequent cases, our electric shock on the
conductor (cable) because of ignorance we will their electricity on the cable.
We can test or check the cable with tools like AVOmeter. What if, in these
conditions we do not have the tools? Definitely we will be looking for help or
seek a loan instrument to a neighbor or friend nearby in our Area. So what if
at that moment we are faced with a situation where we do not have the tools,
and we are also in a state of their own. Are we going to let go, and wait for
destiny without having to try trying out how we know the condition of the
cable.
If we say no, and we are trying
to try to determine the condition of the cable, apaka no electricity or not. It
is not wrong if we ventured to touch the cable. We already know the risks of
action were we to touch the wires. Yes, the risk of touching uninsulated wires
are we going to sting, if it turns out electrified cable. If we are wrong in
holding the cable, then the risk is the worst we die stung. In many cases of
electric shock, the case is because the cable is still in the hands.
If we want to test electricity
without tools, safe way or the best way is to use our left hand. That's because
according to Art Margolis in his book entitled Electrical Wiring, page 56
states that, the flow of electric shock on our body:
- Electric shock through the
right hand will be channeled towards our left foot, and the electricity will
pass through our heart, causing vebrilasi ventriculasi.
- Electric shock through the left
hand will be channeled towards our right foot, and electricity does not pass
through our heart so it does not happen vebrilasi ventriculasi.
Vebrilasi ventriculasi is the
designation for the disruption of the heart rate due to electric shock that
occurs in the human body in a certain period. In addition to using the left
hand, we must also use the back of our palms. That's because the human body has
an iron content in their blood. We know that the electricity it has its own
magnetic field. So if iron were met with a magnet, will take place the name
magnetic attraction to the iron. So from that sense, we can find out why people
were electrocuted when a cable holding will likely not be able to disconnect
the cable from the clutch. The reason is why we have to check or test the cable
with the back of our hands are our hands because the joints can not veer toward
the back of the palm of our hands.
That is the explanation of the
"Easy Way On Cable Without Knowing Electric Tools". The conclusion is
that if we do not have the tools and we want to find out electricity in the
cable then use the back of your hand and use the palm of his left hand. It was
intended that we can minimize the risk of electric shock. Congratulations
practice, and do not forget to always follow this article from the web.
Comments are building indispensable writer in order to improve the quality of
articles in the future. Thanks and greetings from writer to reader.
No comments:
Post a Comment